Bushing / plain bearing
Cylindrical, flanged or split bushings for rudders, hinges, winches, pumps and joints.
Configure →
Configure part
Pick the part. Fill in the dimensions. Get a quote.
For the parts we are asked for most often, the fields are already prepared: dimensions, material, finish, documents. A photo or old drawing helps but is not required. Anything that does not fit the list goes through the free request with drawing upload.
Workshop job Normal workshop manufacture — quote straight from your details.
Clarify first May be safety- or class-relevant: before the quote we clarify which requirements, documents and approvals apply. Marked with ◆ in the lists below.
First assessment – the quotation is binding. For ◆ items the five working days for a quote start once the requirements are clarified.
Clarify first May be safety- or class-relevant: before the quote we clarify which requirements, documents and approvals apply. Marked with ◆ in the lists below.
First assessment – the quotation is binding. For ◆ items the five working days for a quote start once the requirements are clarified.
Bearings, rollers, shafts and gears
Wear parts at bearing points, on shafts and in drives.
Roller, wheel or sheave
Hatch-cover wheels, guide and support rollers, rope sheaves, conveyor and fairlead rollers.
- Hatch-cover wheel
- Guide / support roller
- Rope sheave
- Fairlead / pedestal roller
- Conveyor roller
- Gangway / accommodation ladder roller
Shaft sleeve or wear ring
Protection sleeves under seals and packings, pump wear and split rings, spacer sleeves.
Configure →
Pin, axle or shaft
Hinge and joint pins, roller axles, pump and winch shafts, stepped shafts with keyway.
Configure →
Gear, sprocket or coupling hub
Spur and helical gears, chain sprockets, coupling hubs and halves — to sample or drawing.
Configure →
Bearing block, clevis and eye plate
Welded and machined in one: bearing blocks, bush housings, clevises, eye and link plates, hydraulic cylinder mounts — bore line-bored after welding.
- Bearing block
- Bush housing / plain bearing housing
- Clevis / fork head
- Eye plate / weld-on lug
- Link or connecting plate
- Hydraulic cylinder mount
Deck, hatch covers, doors and cargo
Parts that wear or rust through on deck, in the hold and in the superstructure.
Hatch-cover metal parts
Wheels, axles, hinge eyes and pins, cleats, compression bars, packing channels, support pads, guide blocks, cross-joint wedges.
- Cover wheel with axle
- Hinge eye and hinge pin
- Cleat / quick-acting cleat
- Compression bar and packing channel
- Bearing pad, guide block, wedge
- Drain channel and drain valve
Wear plate, slide pad or guide
Wear and slide plates, guide strips, ramp and hatch slide pads, chute and hopper liners.
- Cargo-hold lining
- Ramp and car-deck wear plate
- Chute and hopper liner
- Slide strip / guide rail
- Fender sliding panel
- Anchor pocket and hawse wear plate
Container and heavy-cargo fittings
Deck and flush sockets, twistlock and cone foundations, D-rings, lashing eyes and plates, heavy-cargo lashing lugs, stoppers, doubler plates.
- Raised deck socket / foundation
- Flush socket
- Cone pocket / container shoe
- D-ring with base
- Lashing eye / pad eye
- Heavy-cargo lashing lug
- Lashing-bridge parts
Deck fittings that rust through
Sounding and air pipe heads, vent covers, scupper pieces, step irons, chocks, bollards and cleats, chain guides, fender brackets.
- Sounding pipe head
- Air pipe head
- Ventilator and vent cover
- Scupper and deck drain
- Step irons and foot rungs
- Chock / fairlead
- Bollard / bitts
- Mooring cleat
- Chain guide and chain holder
- Fender bracket
Doors, small hatches and flaps
Door dogs and hinges, weathertight steel doors, escape and small hatches, service and machinery-space flaps with frames.
- Door dogs and hinges
- Weathertight steel door
- Escape hatch / small hatch
- Service and machinery-space flap
Hinges, door bands and closures
Heavy weld-on hinges, hatch and flap hinges, door bands, dogs, toggles, bolts, stops and locking plates — often remade to sample.
- Heavy weld-on hinge
- Hatch or flap hinge
- Door band / pin hinge
- Dog / toggle closure
- Locking bolt / latch
- Stop, locking plate, special closure
Ventilation grilles, flaps and cowls
Weather louvres and grilles, shut-off and louvre dampers with levers and linkages, ventilator heads and boxes, duct transitions and flanges.
- Weather louvre
- Protective or intake grille
- Shut-off or louvre damper
- Ventilator head / cowl
- Duct, transition, vent box
Covers, access openings and coamings
Manhole covers with frames, inspection and access covers, tank lids, hinged floor covers, coaming frames and complete cover constructions.
Configure →Pipework and engine room
Pipe spools that corrode from the inside, flanges and rings.
Pipe spool
Sea-water, ballast, bilge, fire-main and exhaust pipe spools — straight or with bends and branches, flanged, pressure-tested.
Configure →
Flange, ring or cover
Blind and weld-on flanges, adapter and spacer rings, covers and washers.
Configure →Steelwork and access
Prefabricated in the workshop, welded in on board.
Vertical ladder
Ladders in holds, tanks, engine rooms and on deck — with or without cage, ready to weld in.
- Cargo-hold ladder
- External ladder on a crane
- Mast ladder
- Tank ladder
- Engine-room ladder
- Funnel ladder
- Hatch-coaming ladder
Stairs / companionway
Inclined ladders and stairways with treads, handrails and landings.
Configure →
Railing / handrail
Pipe and flat-bar railings, guard rails, removable stanchions and handrails.
Configure →
Platform, walkway or grating
Platforms and walkways in engine rooms and holds, grating panels, chequer plates.
Configure →
Brackets, supports and guards
Pipe and cable-tray supports, consoles, small foundations, guards and covers.
- Pipe support / clamp
- Cable-tray support
- Console / bracket
- Small equipment foundation
- Guard / cover
- Exhaust support and heat shield
- Device and antenna bracket
- Hose holder and penetration
- Winch console and guard
Boxes and equipment holders
Tool, stowage and battery boxes, protective boxes and tanks; holders for extinguishers, lifebuoys, gas bottles; lamp guards and device brackets.
- Tool box
- Deck stowage box
- Battery box
- Extinguisher holder
- Lifebuoy holder
- Gas bottle rack
- Lamp guard / device bracket
Repair and remanufacture
From the sample or a site survey to a documented, fitted part.
Repair, refurbishment or remanufacture
Re-bushing, build-up welding and re-machining, straightening, cutting out and replacing corroded areas — or measuring a part that is no longer available and making it new.
- Re-bush and re-bore
- Build-up welding and re-machining
- Straighten and repair
- Cut out and replace corroded areas
- Remake a part no longer available
Two kinds of job
Not every part should simply be copied.
Brackets, consoles, guards, covers, simple ladders, boxes and pipe supports are normal workshop jobs — we quote them straight from your details.
Parts that carry load or keep water, weather or fire out — bollards and heavily loaded mooring parts, lifting gear, certain hatches and watertight closures, pressure piping, structural welds — may be class-relevant. For these we clarify the requirements before the quote. Depending on the ship and the use this can include:
- Drawing approval
- Material certificates (EN 10204 3.1 / 3.2)
- Welding procedure qualification (WPS / WPQR)
- Welder qualification
- Non-destructive testing (NDT)
- Load test or strength calculation
- Acceptance by the classification society
More than the part: the whole job
- Drawing, sample or survey on board
- Design and drawing
- Material with certificate
- Fabrication and welding
- Machining — bores, fits, threads
- Preservation and coating
- Documentation
- Fitting on board, on request
Welding and machining from one source is where it pays off most: bearing blocks, hinges, roller mountings, joints and consoles with the bore machined after welding.
Repair instead of new — or remake a part that is no longer available →
Your part is not on the list?
Upload the drawing or photos with the main dimensions — the free request takes any part.